Elstein EBF construction elements are assembled in our factory. They can be equipped with Elstein ceramic panel radiators FSR, HSR/1, HTS/1, SHTS/1 and FSR/2, HSR/2, HTS/2, SHTS/2, whereby it is also possible to combine different radiator designs and wattages of the same types of radiators.

The ceramic infrared radiators mounted in stainless steel reflectors are inserted in the lower part of an extruded, anodised aluminium section with an H-shaped cross-section. Aluminium capping sections close the wiring space in the upper part of the section and die cast end pieces close the end faces.

The user only has to do the wiring, screw in the EBF elements in a steel section frame to be made on site and connect up with the electricity mains.

Elstein EBF construction elements are available in four lengths and can be fitted together to form flat or curved radiation panels in any installed position

Dimensions & Designation 

Technical details 

Further Information

Standard scope of delivery (variants and other lengths are available on request)

Ceramic infrared radiators (FSR, HSR/1, HTS/1, SHTS/1, FSR/2, HSR/2, HTS/2, SHTS/2), fitted
The maximum radiator power level available is 1200 W. Mixed radiator wattages and dimensions can be fitted.

Thermocouple radiators for temperature control are installed in the EBF construction element at the request of the customer. Accessories for controlling the temperature, such as the TRD temperature controller and TSE thyristor switching units are included in the Elstein range of products.

REO reflectors for the radiator dimensions 245 mm x 60 mm and 122 mm x 60 mm, fitted
The REO reflectors are made from polished stainless steel. They are used for holding and fixing the radiators and reflecting the IR radiation in the direction of the material to be heated. On request, the reflectors fitted with ceramic infrared radiators are also available separately under the type designations REF/250 and REF/125.

Extruded frame and capping sections and die cast end pieces made from aluminium, fitted
For surrounding the ceramic infrared radiators fixed to the REO reflectors. Each EBF construction element includes a capping section and two end pieces. The end pieces have an M8 thread for screwing the EBF construction element with a steel section frame. The end pieces also include a ceramic bushing for the electricity cables and a labelled safety earth terminal.

AK bipolar terminal clamps, fitted and connected with radiator power leads
For wiring the ceramic infrared radiators. The Elstein range of products includes accessories for the wiring.

Further information and safety information are given in the technical explanations of this brochure. The EBF mounting instruction also include safety information as well as further details about the installation and the electrical connection.