|
RISH Ducer M20
Features :
- Programmable for specific systems (1/3 phase, 2/3/4 wire)
- Nominal current programmable from 1 to 6 A
- Nominal voltage programmable from 57V to 400 V (Phase-to-neutral), or 100V to 693 V (phase-to-phase)
- Programmable analog outputs (Current or Voltage)
- Digital outputs can be used for limit value monitoring or energy metering
- Programmable Bend Characteristics
- Programmable Response time
- Universal (AC,DC) power pack with very wide tolerance range or AC auxiliary supply.
- Configurable from a PC or RS 232 interface
General- The following ancillary functions are available :
- Power system check
- Display of measurement values at a PC monitor
- Simulation of outputs
- Recording of data in excel file & more
|
Analog Output
|
2
|
|
Digital Output
|
0
|
|
Interface
|
RS 232
|
|
Measured Variables
|
Current & Voltage, Active/Reactive & Apparent Power,Cosφ,Sinφ & Power Factor, Ampere Demand,Frequency, Energy
|
|
Systems
|
Single Phase AC,3Phase 3 wire Balanced/Unbalanced load, 3 Phase 4 wire Balanced/Unbalanced load
|
|
INPUTS
|
|
Frequency
|
|
Nominal Voltage
|
|
Nominal Current
|
|
|
50 to 60 Hz, 16 ⅔ Hz
|
|
57V to 400V
|
|
1A to 6A
|
|
|
Continuous
Overload
Capacity
|
|
|
10A
|
|
480V single phase sys 813 V Three phase sys
|
|
|
OUTPUTS
|
|
Load Independent
DC Current
|
|
Load Independent
DC Voltage
|
|
|
|
Accuracy:
DIN IEC 688
|
|
Frequency
|
|
Current/Voltage
|
|
Power&Power Factor
|
|
|
|
Power
Supply
|
|
|
100V,110V,230V,400V,500V or 693 V
|
|
24V to 60V or 85V to 230V
|
|
|
Response Time
|
1…2 times the measurement cycle
|
|
Measurement Cycle
|
Approx. 0.25 sec to 0.5 sec for 50Hz
|
|
