Process Transducer

RISH Ducer TI 816 (Single Channel)

RISH Ducer PT 602

RISH Ducer TI 807 (Two or Three Channel)

The DC signal isolator serves to electrically isolate the analog DC signal in the range from 0(4)-20mA which depending on version is then converted to a current signal 0(4)-20mA or voltage signal 0(2)-10V It does not require a separate power supply, but derives the little auxiliary power it needs from the DC signal

The temperature transmitter RISHDucer PT602 converts the input variable- a signal from a resistance thermometer PT 100 - to a proportionate temperature linear output signal. The analogue output signal is either an DC current or DC voltage which is processed by other devices for the purpose of displaying, recording and/or regulating a constant temperature. Versions are available for two, three or four-wire connection.

The DC signal isolator serves to     electrically isolate the analog DC signal in the range from 0(4)-20mA which depending on version is then converted to a current signal 0(4)-20mA or voltage signal 0(2)-10V It does not require a separate power supply, but derives the little auxiliary power it needs from the DC signal.

RISH Ducer V604-II

RISH Ducer TV 808

Programmable universal transmitter RISHDucer V604, converts the input variable- a DC current or voltage, or a signal from a thermocouple, resistance thermometer, remote sensor or potentiometer - to a proportional analog output signal.

Isolating Amplifier RISH Ducer TV808, finds its application for isolation, amplification and conversion of DC signals. RISH Ducer TV 808 isolates the DC signal to prevent falsified readings due to interference at input.RISH Ducer TV808 amplifies unipolar/bipolar input by easy, onsite, simple positioning of soldered jumpers to raise the burden capacity.