Digital Multifunction Meter

RISH Master 3410

RISH Master 3420

RISH Master 3425

Rish Master 3425 measures important electrical parameters in 3 phase and single phase Network & replaces the multiple analog panel meters. It measures electrical parameters like AC current, Voltage, frequency, active energy import & active energy export. The instrument has optional output as one pulse output or two pulse output for energy measurement.

RISH Master 3430

RISH Master 3440

RISH EM 3490

Rish Em 3490 is a 96mm x 96mm panel mounted kilowatt hour meter it measures active energy to class 1.0 accuracy with a 7 digit auto-resetting electro-mechanical counter. The unit provides LED indication for healthy phase, earthed load reverse current. .

RISH Integra 1540

RISH Integra 2000

RISH Trans

Electrical Transducer

RISHEMS

RISHEMS (Energy Management System) is an ideal energy management solution for industries, manufacturing plants, shopping malls, commercial buildings or any situation where high amount of electricity is consumed.

RISH Ducer M42

RISH Ducer M24

RISH Ducer M40

RISH Ducer M01

RISH Ducer M20

 RISH Ducer Configuration Software MXX

                               Current, Voltage & Frequency

RISH Ducer : Current I11

RISH Ducer : Voltage V11

RISH Ducer : Frequency F11

¨ Ultra bright 3 line 4 digit LED display

¨ 96 x 96 mm Housing

¨ Programmable 3Ph 3 W/ 4 W at site

¨ Programmable Primary of PT and
Primary & Secondary of CT at site

¨ Accuracy of 0.5 % in V& I

¨ Ultra bright 3 line 4 digit LED display

¨ 96 x 96 mm Housing

¨ Programmable 3Ph 3 W/ 4 W at site

¨ Programmable Primary of PT and Primary & Secondary of CT at site

¨ Accuracy of 0.5 % in V& I

¨ True RMS measurement

¨ Ultra bright 3 line 4 digit LED display

¨ 96 x 96 mm Housing

¨ Programmable 3Ph 3 W/ 4 W at site

¨ Programmable Primary of PT and
Primary & Secondary of CT at site

¨ Accuracy of 0.5 % in V& I

¨ True RMS measurement

¨ Ultra bright 3 line 4 digit LED display

¨ 96 x 96 mm Housing

¨ Programmable 3Ph 3 W/ 4 W at site

¨ Programmable Primary of PT and
Primary & Secondary of CT at site

¨ Accuracy of 0.5 % in V& I

¨ True RMS measurement

¨ Ultra bright LED display, 96x96mm

¨ Accuracy : 0.3% in V & I , 0.5% in Power

¨ Measures 31 electrical parameters

¨ TRMS measurement

¨ THD Measurement Voltage and Current

¨ RS 485 communication (Optional)

¨ EMC Compliant

¨ Backlit graphic LCD display, 96x96mm

¨ Accuracy: 0.5% V & I, 1% in Power

¨ Measures 100+ electrical parameters

¨ TRMS measurement

¨ Four Programmable Analog Outputs (Optional)

¨ Pulse Energy Output.(Optional)

¨ Fully Programmable

¨ Highly Accurate, 0.2% in V & I, 0.25 % in Power

¨ Ultra Fast Response Max 200 ms for V & I.

¨ Programmable 4 Analog and 2 Digital Outputs

¨ RS 485 Modbus Communication (

¨ Display with 7 segment LED

¨ Programmable for specific systems (1/3 phase, 2/3/4 wire)

¨ Nominal current programmable from  1 to 6 A

¨ Nominal voltage programmable from 57V to 400 V (Phase-to-neutral), or 100V to 693 V (phase-to-phase)

¨ Programmable analog outputs (Current or Voltage)

¨ Digital outputs can be used for limit value monitoring or energy metering

¨ Programmable Bend Characteristics

¨ Programmable for specific systems (1/3 phase, 2/3/4 wire)

¨ Nominal current programmable from  1 to 6 A

¨ Nominal voltage programmable from 57V to 400 V (Phase-to-neutral), or 100V to 693 V (phase-to-phase)

¨ Programmable analog outputs (Current or Voltage)

¨ Digital outputs can be used for limit value monitoring or energy metering

¨ Programmable Bend Characteristics

¨ Programmable for specific systems (1/3 phase, 2/3/4 wire)

¨ Nominal current programmable from  1 to 6 A

¨ Nominal voltage programmable from 57V to 400 V (Phase-to-neutral), or 100V to 693 V (phase-to-phase)

¨ Programmable analog outputs (Current or Voltage)

¨ Digital outputs can be used for limit value monitoring or energy metering

¨ Programmable Bend Characteristics

¨ Programmable for specific systems (1/3 phase, 2/3/4 wire)

¨ Nominal current programmable from  1 to 6 A

¨ Nominal voltage programmable from 57V to 400 V (Phase-to-neutral), or 100V to 693 V (phase-to-phase)

¨ Programmable analog outputs (Current or Voltage)

¨ Digital outputs can be used for limit value monitoring or energy metering

¨ Programmable Bend Characteristics

¨ Programmable for specific systems (1/3 phase, 2/3/4 wire)

¨ Nominal current programmable from  1 to 6 A

¨ Nominal voltage programmable from 57V to 400 V (Phase-to-neutral), or 100V to 693 V (phase-to-phase)

¨ Programmable analog outputs (Current or Voltage)

¨ Digital outputs can be used for limit value monitoring or energy metering

¨ Programmable Bend Characteristics

¨ Software provides the flexibility in the selection of : single Phase loads/ 3 Phase 3 Wire Balanced/ unbalanced loads 3 Phase 4 Wire Balanced / Unbalanced loads.

¨ Primary and Secondary of C.T and P.T. can be configured.

¨ The configuration can be changed any time.

RISH Ducer : Current I12

RISH Ducer : Frequency F12

RISH Ducer : Current E15

RISH Ducer : Voltage E1D

RISH Ducer : Current E1D

RISH Ducer : Voltage E13

¨ Designed and Tested to meet Requirements of IEC 688 and IS 12784

¨ Reliable SMD Technology

¨ High Insulation Level

¨ Higher load Capacity

¨ Easy onsite conversion between DIN rail or Panel Mounting

¨ Polycarbonate body, conforming to UL 94-VO

¨ Designed and Tested to meet Requirements of IEC 688 and IS 12784

¨ Reliable SMD Technology

¨ High Insulation Level

¨ Higher load Capacity

¨ Easy onsite conversion between DIN rail or Panel Mounting

¨ Polycarbonate body, conforming to UL 94-VO

Designed and Tested to meet Requirements of IEC 688 and IS 12784

Reliable SMD Technology

High Insulation Level

Higher load Capacity

Easy onsite conversion between DIN rail or Panel Mounting

Polycarbonate body, conforming to UL 94-VO

¨ Designed and Tested to meet Requirements of IEC 688 and IS 12784

¨ Reliable SMD Technology

¨ High Insulation Level

¨ Higher load Capacity

¨ Easy onsite conversion between DIN rail or Panel Mounting

¨ Polycarbonate body, conforming to UL 94-VO

¨ Designed and Tested to meet Requirements of IEC 688 and IS 12784

¨ Reliable SMD Technology

¨ High Insulation Level

¨ Higher load Capacity

¨ Easy onsite conversion between DIN rail or Panel Mounting

¨ Polycarbonate body, conforming to UL 94-VO

¨ Designed and Tested to meet Requirements of IEC 688 and IS 12784

¨ Reliable SMD Technology

¨ High Insulation Level

¨ Higher load Capacity

¨ Easy onsite conversion between DIN rail or Panel Mounting

¨ Polycarbonate body, conforming to UL 94-VO

RISH Ducer : Current  E13

RISH Ducer : Voltage V21

RISH Ducer : Voltage I21

RISH Ducer : Current I22

RISH Ducer : P11- Active/Reactive

RISH Ducer P11 measures active / reactive power of a single phase/ three phase system with balanced or unbalanced load by TDM (Time Division Multiplexing) principle and converts it into proportionate load independent DC Current or DC Voltage. The design is having negligible effect of power factor variation and output is accurate at very low power

RISH Ducer : C11 - Powe Factor/Phase Angle

RISH Ducer- C11 measures the phase angle between Current and Voltage of a single or three phase balanced network having sine waveform. The output signal, in the form of load independent DC Current or Voltage, is proportional to phase angle between current and voltage.

¨ Designed and Tested to meet Requirements of IEC 688 and IS 12784

¨ Reliable SMD Technology

¨ High Insulation Level

¨ Higher load Capacity

¨ Easy onsite conversion between DIN rail or Panel Mounting

¨ Polycarbonate body, conforming to UL 94-VO

¨ Designed and Tested to meet Requirements of IEC 688 and IS 12784

¨ Reliable SMD Technology

¨ High Insulation Level

¨ Higher load Capacity

¨ Easy onsite conversion between DIN rail or Panel Mounting

¨ Polycarbonate body, conforming to UL 94-VO

¨ Designed and Tested to meet Requirements of IEC 688 and IS 12784

¨ Reliable SMD Technology

¨ High Insulation Level

¨ Higher load Capacity

¨ Easy onsite conversion between DIN rail or Panel Mounting

¨ Polycarbonate body, conforming to UL 94-VO

¨ Designed and Tested to meet Requirements of IEC 688 and IS 12784

¨ Reliable SMD Technology

¨ High Insulation Level

¨ Higher load Capacity

¨ Easy onsite conversion between DIN rail or Panel Mounting

¨ Polycarbonate body, conforming to UL 94-VO